SKF 216-2ZNR bearing

216-2ZNR (Schaeffler) SKF 216 Bearing | BEARING DESIGNATION SYSTEMS
Online Messages
  • Cylindrical roller bearings, single row - NU 216 ECP - SKF

    d, 80, mm. D, 140, mm. B, 26, mm. D1, ≈, 121.7, mm. F, 95.3, mm. r1,2, min. 2, mm. r3,4, min. 2, mm. s, max. 1.4, mm. Abutment dimensions. da, min. 90, mm. da, max. 93, mm. db, min. 98, mm. Da, max. 129.8, mm. ra, max. 2, mm. rb, max. 2, mm. Calculation data. Basic dynamic load rating, C, 160, kN. Basic static load rating
  • BEARING DESIGNATION SYSTEMS

    Within each order code, a distinction is made between the basic designation and any suffixes and/or prefixes. The basic designation indicates the bearing type and the bore size. These basic designations are defined in the. German DIN 623 standard and the relevant. ISO standard. For most bearing types, the.
  • 6306-2ZNR | Deep Groove Ball Bearing 6306-2ZNR 30mm I.D

    SKF High Temperature Deep Groove Ball Bearing. SKF high temperature bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures. SKF high temperature bearings correspond to the ISO dimensions of grease-lubricated bearings.
  • Deep groove ball bearings - 6201-2ZNR - SKF

    d, 12, mm. D, 32, mm. B, 10, mm. d1, ≈, 18.45, mm. D2, ≈, 27.34, mm. D3, 30.15, mm. D4, 36.7, mm. b, 1.35, mm. C, 2.06, mm. f, 1.12, mm. r0, max. 0.4, mm. r1,2, min. 0.6, mm. Abutment dimensions. da, min. 16.2, mm. da, max. 18.4, mm. Da, max. 27.8, mm. Db, min. 38, mm. ba, min. 1.5, mm. Ca, max. 3.18, mm. ra, max.
  • SKF Deep Groove Ball Bearings - Acorn Bearings

    MRC seal designation (SKF 2RS1). 2Z. Steel plate on 2 sides. 3. Cage Design. J. Pressed steel cage, rolling element guided. JEM. Steel cage (J), quiet running, C3 clearance (not marked on bearing)**. M. Machined brass cage, rolling element guided. MA. Machined brass cage, outer ring guided. TC. Phenolic cage, inner